Fractional order PID Design using the Taguchi method
Abstract
This paper presents a gain-tuning scheme for Fractional order PID control systems using the Taguchi method. A prismatic series elastic actuator is selected as an experimental set-up. An optimal controller gains has been obtained through a series of experiments suggested by the Taguchi method. Four stages of tuning are performed in order to accurately tune the controller gains. It is shown that when performance of the proposed controller is compared with two additional controllers: a traditional FOPID tuned with Ziegler-Nichols (Z-N) method and a PID tunned with genetic algorithm, a 94% and 84% improvements in position error is observed, respectively.
Full Text:
PDFDOI: http://doi.org/10.11591/ijra.v4i3.pp176-185
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
IAES International Journal of Robotics and Automation (IJRA)
ISSN 2089-4856, e-ISSN 2722-2586
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).